CYP CS-802D Spezifikationen PDF herunterladen (Seite 28)

CAK50/CAK61 SERIES ERROR! USE THE HOME TAB TO APPLY 标题 1 TO THE TE

SHENYANG MACHINE TOOL CO., LTD 21

5 CONSTRUCTION OF THE MACHINE

5.1 Layout of the Machine

Refer to Fig. 2, please.

Fig. 2 Layout of the machine

5.2 Brief Introduction to Parts of Machine

5.2.1 Headstock

 Common (refer to Fig. 3-1).

The main driving system separately engages the two electromagnetic clutches on

Shaft I to make the gears 2, 3 engaging when the electromagnetic clutches on the

left is sucked on and when the electromagnetic clutches on the right is sucked on,

gear1 engages with 4. If through the speed-changing lever of spindle (see Fig. 4) to

make the gears 9, 10 engaging, spindle is under high-speed status. If by means of

the changing lever to make gear 5 engages with 6, 7 engages with 8, 11 engages

with 12 first and through the sliding gear 13 on Shaft V engaging with big gear of

the spindle 14, the transmission of the spindle is low-speed state, and the spindle

van obtain low speed.

The machine is of 12-step stepless changing speed. The driving calculations of

various revolution speeds of each step are calculated as follows：

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 78 79

Keine Kommentare

CYP CS-802D Spezifikationen Seite 28